How To Read The Display; How To Apply A New Probe Cover - Microlife IR1DB1 Instruction Manual

5. How to Read the Display

Display
Seen when you turn on the unit.
Shown for 2 seconds.

6. How to Apply a New Probe Cover

(1) Place a probe cover onto the storage case
hole with paper side upwards. Align the cover
to fit the hole exactly.
(3) Completely push the probe into the
probe cover holder hole. Push firmly.
Please Note: Unit is calibrated to work with probe covers. Only use of CVS probe covers ensures
accuracy and hygenic use.
Display Meaning
Self-check ensures proper
functioning.
Last reading stored in memory.
Ready to measure.
Measurement complete
°C or °F stops flashing.
Low battery indication.
Unit will not take accurate
measurements.
(2) Take the unit, vertically penetrate the probe
(4) After feeling a slight click, take out the probe.
Description
Press the ON/OFF button to turn
on the unit. All icons will be
shown for 2 seconds.
The last reading will be shown
on the display automatically for
3 seconds.
The unit beeps once and the
°C or °F icon is flashing.
Unit beeps once.
When the °C or °F starts to
flash you can take another
temperature.
The battery icon will flash to
remind the user to replace the
battery.
into the center part of the probe cover.
The cover should be securely attached.
4