Directions For Use - Microlife IR1DQ1-1 Manual

button 6 to confirm and then set the day.
• Follow the instructions above to set the day, 12 or 24 hours
System mode, hours and minutes.
• Once you have set the minutes and pressed the M button 6,
the date and time are set and the time is displayed.
• If you want to change the date and time, press and hold the M
button 6 down for approx. 3 seconds until the year number
starts to flash BN. Now you can set the new values as described
above.
• Clicking the ON/OFF button 4 during time setup (after battery
insertion) will remove the device from setting the time and the
LCD will show Date /TIME icons respectively with "--:--" After
that press the ON/OFF button 4 to start the test or if no further
action is taken within 20 seconds, the device will automatically
turn off.
• When the device switched off, press and hold the ON/OFF
button 4 for 5 seconds to set the beeper BO.
7
Press the ON/OFF button 4 to turn the beeper on and off. The
thermometer will indicate whether the beeper is activated by
displaying a beeper icon on the screen.
If no button is pressed for 5 seconds, the device automatically
switches into the ready for measurement mode.

6. Directions for Use

1. Press the ON/OFF button 4 . The display 2 is activated to
show all segments for 1 second.
2. When the «° C » or «° F » icon is flashing, a beep sound is heard
and the thermometer is ready for measuring. The blue probe
LED is activated and will automatically turn off after 10 seconds.
Press the START button for measuring or auto-off after 60
seconds 9 .
3. Straighten the ear canal by pulling the ear up and back to give
a clear view of the eardrum.
• For children under 1 year; pull the ear straight back.
• For children of 1 year to adult; pull the ear up and back.