Removing A Micro-Drive/Memory Card; Cd Changer Mode; Operational Readiness Of Cd Changer; Loading/Ejecting The Cd Magazine - Becker Traffic Pro 7949 Operating Manual

Media mode

Removing a micro-drive/memory card

X Remove the control panel as described
in "Removing/Inserting the control
panel" on page 13.
Remove the cover as described in
X
"Inserting/Removing the cover" on
page 14.
X Press the eject button located to the
top left of the slot.
X The micro-drive/memory card is
pushed forwards out of the slot.
X Pull the micro-drive/memory card out
of the slot.
X Reinsert the cover as described in
"Inserting/Removing the cover" on
page 14.
Reinsert the control panel as described
X
in "Removing/Inserting the control
panel" on page 13.
82

CD changer mode

The following points, described in "CD
mode" on page 77 apply to CD changer
mode:
• "Notes on compact discs (CD)" on
page 77.
• "Notes on CD-R and CD-RWs" on
page 78.
Operational readiness of
CD changer
If a CD changer is connected to the Traffic
Pro, it will be ready for operation as soon
as the CD magazine, loaded with CDs, is
inserted. Close the sliding cover after
loading. All further operation is per-
formed from the Traffic Pro control panel.
Loading/Ejecting the
CD magazine
To eject the CD magazine, open the slid-
ing cover on the changer and press the
eject button. The magazine is ejected
and can be removed.
When inserting CDs into the magazine,
please note the instructions printed on
the magazine.
Attention:
Incorrectly inserted CDs will not be
played.
Note:
To allow for the fastest possible change
of CDs, the magazine should be loaded
successively, beginning with compart-
ment 1.