Volume For Acoustic Signals; Displaying The Volume; Digital Level - Becker Traffic Pro 7949 Operating Manual

Settings
Note:
A setting of "0" indicates no increase in
volume.
A setting of "10" indicates the maximum
increase in volume.

Volume for acoustic signals

You can change the volume for acoustic
signals.
X Select in the system settings.
X Select
7017
X Turn the rotary control/push button
to select the required value.
Note:
A low value indicates a low volume for
acoustic signals.
100

Displaying the volume

You can activate/deactivate the display of
a change in volume in graphics format.
Select in the system settings.
X
X Select
7018
X Turn the rotary control/push button
to switch the function on ( ) or off
.
( ).

Digital level

You can adapt the volume level of digital
audio sources (MP3) to analogue audio
sources (radio).
. X Select
X Select
7019
X Turn the rotary control/push button
to select the required value.
Note:
A setting of "0" indicates no decrease in
volume.
A setting of "10" indicates a significant
decrease in the volume of the digital
audio source.
in the system settings.
.