Commands In The Waveband Menu - Becker Traffic Pro 7949 Operating Manual

Voice mode
• Call up TP menu (page 64).
Say the command Traffic pro-
gramme.
Alternative commands:
Traffic info, Open traffic info [menu]
or Open traffic programme [menu].
• Call up Voice Entries menu (page 71).
Say the command Voice entries or
Open voice entries.
• Switch regionalisation on/off (page 62).
Switch on:
Say the command Regionalisation
on or Activate regionalisation.
Switch off:
Say the command Regionalisation
off or Regionalisation off.
118
• Call up Reception Optimisation menu
(page 63).
Say the command Reception opti-
misation [menu] or [Open] reception
optimisation [menu].
• Switch bandwidth control on/off
(page 64).
Switch on:
Say the command Adaptive band-
width control on or [Activate] adap-
tive bandwidth control.
Switch off:
Say the command Adaptive band-
width control off or Deactivate adap-
tive bandwidth control.

Commands in the Waveband menu

3002
In the Waveband menu, the following
commands are available (page 56):
• Set VHF waveband according to
quality.
Say the command FM quality.
Alternative commands:
[Activate] [very high frequency] by
quality, [Activate] [VHF] by quality,
[Activate] [FM] by quality, [Select]
[very high frequency] by quality,
[Select] [VHF] by quality or [Select]
[FM] by quality.