Security - Barco iQ PRO G 500 Owner's Manual

13.8 Security

What can be done ?
A security function is implemented in the projector and allows a protection against theft.
A PIN code allows the user to lock the projector in case of wrong code entry.
The PIN code must be entered at each start up (Power ON), entering three times a wrong number triggers a wait cycle of 15 minutes,
the second 3 wrong codes a wait cycle of 30 minutes, 1 hour, ...
The security mode can be enabled or disabled.
How to activate the security mode ?
1. Press MENU to activate the Tool bar
2. Press → to select the installation item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Security (image 13-12)
5. Press → to open the menu
6. Use ↑ or ↓ to select ON
7. Press ENTER
A dialog box is displayed (image 13-13)
8. Use the arrow keys to select YES and press ENTER to confirm
A dialog box is displayed
Enter your name, company name,... (this information is displayed in the identification menu) (image 13-14)
9. Press ACCEPT
A dialog box is displayed.
Enter the PIN code, and confirm it. (image 13-15)
An informative text box is then displayed. Press ENTER or BACK to escape. (image 13-16)
Image 13-12
R5976491 IQ PRO G 350/500 19/09/2006
13. Installation menu
119