Table of Contents
Advertisement
Port 2 : Video or S-Video
What can be done ?
Port 2 can be used as a Video or S-Video input.
How to configure port 2 ?
To change the Port 2 setting, handle as follow :
1. Push the cursor key é or ê to select Port 2 (menu 1).
2. Press ENTER to toggle between Video and S-Video.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
PORT2 :
VIDEO
LINE DOUBLER : ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 1
Line Multiplier
What can be done ?
This menu item is only available when the projector is equipped with a line multiplier.
Line multiplying is only possible for Video, S-Video, Component Video images on standard line frequency and RGB signals on 15
kHz.
The multiplier eliminates the video line patterns and improves the image stability. In addition,
- the time base correction virtually eliminates the timing jitter caused by the common videocassette recorders.
- de-interlacing gets rid of line flicker.
- film mode processing makes sure that material that has been converted from 24 Hz cinema to video (2:2 and 3:2 pull down) is displayed
without artifacts.
- dynamic noise reduction can be used to improve noisy video sources.
- static contrast enhancement allows the user to adjust the image contrast to personal taste.
- several detail-enhancing filters bring out details.
The line multiplier when available is active.
The setting of the line multiplier will be saved together with the source number. Each time this source number is selected, the last
saved version will be loaded.
How to select when a line multiplier is built in ?
1. Push the cursor key é or ê to select Line Multiplier (menu 1).
2. Press ENTER to select.
The line multiplier menu will be displayed (menu 2).
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
LINE MULTIPLIER
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 1
5976227 BARCOCINE 8 13042001
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
ADVANCED SETTINGS
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
Random Access Adjustment Mode
7-7
Advertisement
Table of Contents
