Table of Contents
Advertisement
How to adjust ?
1. Use the cursor keys to move the box to the desired zone.
2. Press ENTER to begin the convergence adjustment.
Start the convergence adjustment with zone one and continue as mentioned in the image 1.
3. Use the cursor keys to make horizontal or vertical convergence adjustments in the selected zone (image 2).
4. Press ENTER to move to another zone.
5. Press EXIT to return to the convergence menu.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with
or
then <ENTER>
<EXIT> to return.
menu 1
CONVERGENCE
SEL : select area
using
arrow keys
ADJ : adjust area
using
arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
menu 3
Focusing
What can be done ?
After the lenses are mechanically correct focused, the CRT's can be electromagnetic focused until the image is on each point.
Start Up
1. Push the cursor key é or ê to highlight 'Focusing' (menu 1).
2. Press ENTER to display the focusing menu (menu 2).
The focusing has to be done for the three colors separately.
Start with Green and continue with Red and Blue.
The following items can be adjusted per color (menu 3) :
- Midpoint focusing
- Top image focusing
- Bottom image focusing
- Left image focusing
- Right image focusing
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with
then <ENTER>
<EXIT> to return.
menu 1
5976227 BARCOCINE 8 13042001
CONVERGENCE
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
Select with
or
then <ENTER>
<EXIT> to return.
menu 2
image 2
FOCUSING
RED
GREEN
BLUE
BLUE ON SOURCE
or
Select with
then <ENTER>
<EXIT> to return.
menu 2
25
23
24
22
5
4
20
18
21
19
image 1
CONVERGE
ADJUSTMENT
70
FOCUSING
MIDPOINT
TOP
BOTTOM
LEFT
RIGHT
or
Select with
then <ENTER>
<EXIT> to return.
menu 3
Random Access Adjustment Mode
15
17
9
8
14
16
1
2
3
6
10
12
7
11
13
image 3
or
green image
red image
7-25
Advertisement
Table of Contents
