How To Set Convergence To Midposition; Undo Convergence Mid; What Can Be Done; How To Undo - Barco Cine 8 Owner's Manual

How to set convergence to midposition :

1. Push the cursor key é or ê to highlight 'Convergence Mid' (menu 1).
2. Press ENTER to select.
A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm.
Press EXIT to cancel the procedure to set the convergence settings to their midposition.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Undo convergence mid

What can be done ?

When "Convergence mid" is selected, all convergence settings are set to their midposition. With the undo, it is possible to return
to the previous settings as long as the projector is playing on the same source (= same adjustment block).
'Undo convergence mid' is displayed in the service menu in stead off 'Convergence mid' when this latter is pressed.

How to Undo ?

1. Push the cursor key é or ê to highlight 'Undo convergence mid' (menu 1).
2. Press ENTER to execute the undo function.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
UNDO CONVERGENCE MID
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Dynamic Astigmatism

What can be done ?
The spot shape can be adjusted in 8 different areas on the screen and that for the three colors separately. The spot shape can be
adjusted according the axial axises and the diagnonal axis.

Note

Spot shape adjustment has to be done on a dot pattern (e.g. the internally generated pattern) with standard line frequency (15 kHz).
The adjustment values are stored and remain the same for all other frequencies.
5976227 BARCOCINE 8 13042001
CONVERGENCE MID
Convergence settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
menu 2
Service Mode
8-7