Korg X5DR AI2 Owner's Manual: Connection Via Midi

Synthesis system for all digital processing.
Hide thumbs

Connection via MIDI

To connect a stand-alone MIDI sequencer or a computer with a MIDI interface to the X5DR, use
MIDI cables to connect MIDI OUT of the sequencer or computer (MIDI interface) to MIDI IN on
the X5DR.
Computer/Sequencer
Connect the MIDI OUT jack of the MIDI keyboard to the MIDI IN jack on the sequencer or
computer (MIDI interface) using MIDI cables. If you input performance data from the computer
or sequencer, you do not have to connect the MIDI keyboard.
If you wish to connect an additional MIDI device, connect it to the MIDI OUT jack of the
sequencer or computer (MIDI interface), or to the MIDI THRU jack of the X5DR. Refer to "About
MIDI" on page 65 for information on connections using the MIDI THRU jack.
• Refer to the manual that comes with the MIDI interface for information on the connection of
the computer and MIDI interface, and the MIDI port settings.
MIDI Keyboard
MIDI IN
MIDI Interface
MIDI OUT
DC IN 12V
TO HOST
700mA
Start-up Guide
MIDI OUT
MIDI IN
MIDI
THRU
OUT
IN
OUTPUT
R
Using a
Computer/
Sequencer
L/MONO
11

Advertising

   Related Manuals for Korg X5DR AI2

Comments to this Manuals

Symbols: 0
Latest comments:
  • jr Nov 18, 2013 11:36:
    does the korgx5dr have an arpagiator in it?