Korg X50 Operation Manual: Control Via Midi

Korg x50 music synthesizer operation guide.
Hide thumbs
Using and Editing Multi sets

Control via MIDI

Multi mode enables the X50 to function as a MIDI
tone generator that is controlled from the con-
nected computer to play ensemble music consist-
ing of multiple instrument parts. This mode also
permits you to use the X50 as a GM tone genera-
tor.
Parameters and performance data
A multi set consists of tracks 1–16, parameters
such as the multi set name, effect and arpeggiator
parameters, and a tempo setting.
You can store 128 of these multi sets in the X50.
Tracks 1–16 consist of the following "setting
parameters," and will transmit and receive the
"performance data" listed below.
MIDI tracks 1–16
Setup parameters
Bank/Program No.*, Pan*, Volume*, Status, MIDI
Channel, Bank Select (When Status=EX2), Force
OSC Mode, OSC Select, Portamento*, Transpose**,
Detune**, Bend Range**, OSC On/Off Ctrl, Delay,
Use Program's Scale, MIDI Filter, Key Zone, Veloc-
ity Zone, Track Name, IFX/Indiv.Out BUS Select,
Send1(MFX1)*, Send2(MFX2)*
Performance data
Note On/Off
Program Change (including Bank Select)
Pitch Bend
Parameter
0
Program Select
Pan
Volume
2
Status
Use Program's Scale
7
Arpeggiator Assign
Other Arpeggiator parameters
8
IFX/Indiv.Out BUS Select
Send1(MFX1)
Send2(MFX2)
IFX
Pan(CC#8)
BUS Select
Send1
Send2
Other Insert Effect parameters
9
MFX1
MFX2
Return1
Return2
Other Master Effect and Master EQ parameters
76
After Touch (Poly After)
Control Change
Exclusive Message
Tempo*
* You can record tempo as performance data by
adjusting it while you realtime-record onto an
external MIDI sequencer. By receiving this data,
you can change the setting of the multi set during
the playback.
** You can use performance data (MIDI RPN data)
to change the settings of a multi set during play-
back.
Other parameters: By editing the settings during
realtime recording, you can record the corre-
sponding MIDI exclusive messages as perfor-
mance data on your external MIDI sequencer. This
gives you a way to change the settings of the multi
set during playback. (GLOBAL 1: MIDI, MIDI Fil-
ter "Exclusive" must be checked.)
• For details on Control Change messages and
RPN (☞PG p.172, 175).
• For details on MIDI System Exclusive messages
(☞PG p.176).
Default Settings in Multi Mode
The following table shows the default settings for
Multi mode that are automatically selected, when
GM Initialize is executed, or when the X50
receives a GM ON messages (F0 7E 7F 09 01 F7).
Track1–9, 11–16
G001: Acoustic Piano
g001: (d): STANDARD Kit
C064
100
L/R
0
40
Track10
C064
100
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
DKit
0
40
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
16: St. Chorus
53: Rev Smth. Hall
127
050
Default settings

Advertising

   Also See for Korg X50

   Related Manuals for Korg X50

Comments to this Manuals

Symbols: 0
Latest comments:
  • Mike Saunders Jun 24, 2017 04:35:
    Great manual a must for any owner to have also great site for download
  • sonny May 20, 2016 06:52:
    I dont understand manual user korg x50 in english langue.can you send manual user korg x50 in indonesia langue..
  • sonny May 20, 2016 06:52:
    I dont understand manual user korg x50 in english langue.can you send manual user korg x50 in indonesia langue..
  • sonny May 20, 2016 06:22:
    I dont understand manual user korg x50 in english langue.can you send manual user korg x50 in indonesia langue..