Lucent Technologies MERLIN LEGEND Release 6.1 Pocket Reference page 128

MERLIN LEGEND Communications System Release 6.1
Pocket Reference 555-661-116
Technical Addendum
Technical Addendum
Maintenance Error Codes (continued)
Error
Code
6C0B HARDWARE
INOPERATIVE:
Hardware not operating
properly. If this is the only
100D module or 800 NI-BRI
module, or if this is the
designated clock module,
its TDM bus clock generator
was not activated.
6C0C BRI LOSS OF SYNC:
Service on link has been
lost.
6C0D BRI SLIPS > 88:
Slip count > 88. Service on
link is still operative.
6C0E BRI NET REQUESTED
CCRCs:
Outgoing signal to the
network does not have valid
framing information. Service
on link is still operative.
6C0F BRI NET
DEACTIVATE:
Layer 1 of the link is down.
Service on link has been
lost.
6C10 BRI NET INV 2B+D
LB ACT:
Service on link has been
lost.
Description Action
A Busy-Out/Restore or
Reset/Restore may clear
problem. If problem
persists, contact NSAC
Tier III.
Usually none; check BRI
facility. If problem
persists, contact NSAC
Tier III.
Usually none; check BRI
facility. If problem
persists, contact NSAC
Tier III.
Usually none; link should
return to normal once test
is completed. If problem
persists, contact NSAC
Tier III.
Usually none; link should
return to normal once test
is completed. If problem
persists, contact NSAC
Tier III.
Usually none; link should
return to normal once test
is completed. If problem
persists, contact NSAC
Tier III.
Issue 1
August 1998
Page 122