Lucent Technologies MERLIN LEGEND Release 6.0 Network Reference Manual page 188

MERLIN LEGEND Communications System Release 6.0
Network Reference 555-660-150
5 System Management
Non-Local Dial Plan Numbering
Valid Entries
New extension ranges : Starting and ending numbers for non-local extension
ranges
Deleting extension ranges : Starting numbers for non-local extension ranges to be
deleted
Task List: Non-Local Dial Plan Numbering
NOTE:
Any local dial-plan changes should be made before you program the non-
local dial plan.
o
Obtain Non-Local UDP Administration Form in the Installation
Specification, Non-Local Dial Plan Numbering.
o
Read Chapter 2, "Call-Handling Scenarios," for examples of non-local dial
plans.
o
Plan changes or new extension ranges using the planning guidelines
above and after consulting other system managers in the network. Record
the new values on the form.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions below, or consult
"Non-Local Dial Plan Numbering" in the "System Renumbering" section of
System Programming , Chapter 3.
o
When you have finished, file the form with the rest of the planning forms.
5
Issue 1
February 1998
Page 5-12