How To Use This Book; Terms And Conventions Used; Call-Handling Scenarios - Lucent Technologies MERLIN LEGEND Release 6.0 Network Reference Manual

MERLIN LEGEND Communications System Release 6.0
Network Reference 555-660-150
About This Book

How to Use This Book

How to Use This Book
This guide includes five chapters:
Chapter 1, Introduction. This chapter provides a grounding in the basic
terminology and concepts that you must understand in order to manage a
networked system.
Chapter 2, Call-Handling Scenarios. Studies several sample network
configurations, demonstrating how the systems are set up for networking,
how calls are made and received, and the advantages and disadvantages
of each configuration.
Chapter 3, Feature Interactions. Describes the ways that system features
work in networks.
Chapter 4, Security. Discusses security issues and considerations.
Chapter 6, System Management. Summarizes programming procedures
for setting up and modifying network operations.
Chapter 6, Troubleshooting. Describes common problems that you may
encounter, their possible causes, and their solutions.
This guide is intended as a companion to the Release 6.0 Feature Reference ,
System Programming, and System Manager's Guide, which explain many system
features and procedures in greater detail. Because private networks leverage
existing communications system features as well as introducing new ones, this
guide focuses not on a thorough discussion of system management and system
features but rather on how they apply to private networks.
on page –xl
ordering information.
In the USA only, Lucent Technologies provides a toll-free customer Helpline
24 hours a day. Call the Helpline at 1 800 628-2888 (consultation charges may
apply), or call your Lucent Technologies representative, if you need assistance
when installing, programming, or using your system.

Terms and Conventions Used

The terms described here are used in preference to other, equally acceptable
terms for describing communications systems.
Lines, Trunks, and Facilities
Facility is a general term that designates a communications path between a
telephone system and the telephone company central office. Technically, a trunk
connects a switch to a switch, for example, the MERLIN LEGEND
Communications System to the central office. Technically, a line is a loop-start
facility or a communications path that does not connect switches, for example, an
provides a complete list of system documentation together with
0
"Related Documents"
0
Issue 1
February 1998
Page xxxviii