AT&T MERLIN LEGEND Release 2.0 MLX Queued Call Console Operator's Manual page 42

About Your Queued Call Console
Inspecting a Fixed Feature Button
To view fixed feature button information, press Inspct, then
press a feature button. Additional information for fixed feature
buttons appear as follows.
For Start, Headset/Handset Mute, Send/Remove
Message, Position Busy, Release, Headset Status,
Night Service, Cancel, Join, Headset Auto Ans, or
Forced Release the feature name appears on the
display.
For either Source or Destination, when a call is on
hold on the button, the button name and calling
information a bout the held call appear (for example, a
person's name or the trunk name and trunk number). If
no call is on hold on Source or Destination, only the
feature name appears on the display screen.
For Alarm, the display shows the number of alarms in
your system.
For Pool Status, the number of trunks in each pool
and the number of trunks in use appear. For example,
P70: 3 of 9 busy means that 3 out of 9 trunks in
pool 70 are busy.
1-31
Display