Inspect - AT&T MERLIN LEGEND Release 2.0 MLX Queued Call Console Operator's Manual

Features

Inspect

Use inspect when you are on a call and you want to inspect
other Call buttons. When you press Inspct and a Call
button, lines 1 and 2 of your display show detailed information
about the Call button you pressed, and lines 5 through 7
show abbreviated information for all Call buttons.
Inside call information includes the caller's extension (and the
caller's name if it's programmed in your system). Outside call
information includes
trunk, if it's been programmed) and the trunk number.
If your company subscribes to an automatic number
identification (ANI) service, you see the outside phone
number of the person calling you.
NOTE
The availability of the caller identification information may
be limited by local-serving (caller's) jurisdiction,
availability, or central office equipment.
If you inspect a Call button for a conference, your display
shows who is connected on the conference. An asterisk
appears next to the name of the last person added to the
conference. This person will be dropped from the conference
if you press Drop, then the Call button.
(or the name assigned to the
OUTS IDE
Inspect 4-29