Basic Administration - AT&T MERLIN 3070 Administration Manual

Basic Administration

Once your system planning and paperwork are complete, you can perform basic ad-
ministration procedures. The chart below lists the procedures described in this sec-
tion. Remember that if you are administering a new system that has just been in-
stalled, some of these basic procedures maybe required to set the proper operating
conditions for your particular environment, and you must perform them first before
you goon to do any other system administration. Carry out the procedures in the
order listed in the chart, but keep in mind that you may not need to perform all of them
to customize your system to your particular environment. Read each procedure first
to see if it applies to you.
Administer your system at a time when you do not expect many peo-
IMPORTANT:
ple to be using their voice terminals.
Basic Administration Procedures
Set your control unit.
Learn how to enter and leave administration mode.
Specify Touch-Tone or rotary dialing.
If you have a square system, assign lines to buttons on voice terminals.
If you have a pooled system, set up line pools, assign individual lines and
line pools to voice terminals, and establish Button Access to Line Pools
or Dial Access to Line Pools.
2 1