Super Io Device - DFI LanParty LT P35 User Manual

Super IO Device

Power On By Mouse
Power On By Keyboard
x Power On By Button
x KB Power On Password
x Hot Key Power On
Onboard FDC Controller
Onboard Serial Port
Onboard IRDA Select
x IR Mode Select
x UR2 Duplex Mode
PWRON After PWR-Fail
CIR Port Address
x CIR Port IRQ
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Power On By Mouse
Disabled
Mouse Move
Mouse Click
Power On By Keyboard
This field allows you to use the keyboard to power-on the system.
Button only
Password
Hot Key
Any Key
Keyboard 98
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Disabled
Button Only
Enabled
Enter
Ctrl+F1
Enabled
3F8/IRQ4
Disabled
IrDA
Half
Off
Disabled
11
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the mouse power-on function.
Move the mouse to power on the system.
Click the mouse to power on the system.
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password
you would like to use to power-on the system in
the "KB Power On Password" field.
When this option is selected, select the function
key you would like to use to power-on the sys-
tem in the "Hot Key Power On" field.
Press any key to power-on the system.
When this option is selected, press the "wake
up" key of the Windowsâ 98 compatible key-
board to power-on the system.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
9 5