Features - DFI LanParty LT P35 User Manual

1
Introduction

Features

creasing its power consumption. DDR2 SDRAM modules work at
1.8V supply compared to 2.6V memory voltage for DDR modules.
DDR2 also incorporates new innovations such as the On-Die Termi-
nation (ODT) as well as larger 4-bit pre-fetch against DDR which
fetches 2 bits per clock cycle.
DDR3 are its higher bandwidth and its increase in performance at a
lower power than DDR2.
front audio connector and S/PDIF output allowing digital connections
with DVD systems or other audio/video multimedia.
it is converted to analog. S/PDIF is usually found oyn digital audio
equipment such as a DAT machine or audio processing device. The
S/PDIF interface on the system board sends surround sound and
3D audio signal outputs to amplifiers and speakers and to digital
recording devices like CD recorders.
i d e i d e
i d e i d e i d e
12
LP UT P35-T2R and LP LT P35-T2R support high per-
formance DDR2 technology whose data transfer rate
delivers bandwidth of 12.8 Gb/s and beyond. That is
twice the speed of the conventional DDR without in-
LP UT P35-T3R and LP LT P35-T3R support DDR3
memory that delivers increased system bandwidth and
improved performance. DDR3 offers peak data transfer
rate of up to 17 Gb/s bandwidth. The advantages of
The Realtek ALC885 on the Bernstein audio module
supports 6 audio jacks that provide 8-channel audio out-
put for advanced 7.1-channel super surround sound au-
dio system. It is also equipped with a CD-in connector,
S/PDIF is a standard audio file transfer format that
transfers digital audio signals to a device without having
to be converted first to an analog format. This prevents
the quality of the audio signal from degrading whenever
The JMicron JMB363 controller suppor ts up to two
UltraDMA 100Mbps IDE devices.