Usb Device Setting; Usb Operation Mode - DFI LanParty LT P35 User Manual

3
BIOS Setup

USB Device Setting

*** USB Mass Storage Device Boot Setting ***
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
USB 1.0 Controller
This field is used to enable or disable the Universal Host Controller
Interface (USB 1.0).
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller
Interface (USB 2.0).

USB Operation Mode

This field is used to select the USB's operation mode. The options
are Full/Low Speed and High Speed.
9 8
Phoenix - AwardBIOS CMOS Setup Utility
USB 1.0 Controller
USB 2.0 Controller
USB Operation Mode
USB Keyboard Function
USB Mouse Function
USB Storage Function
: Move Enter: Select
USB Device Setting
Enabled
Enabled
High Speed
Enabled
Enabled
Enalbed
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
[Enable] or [Disable]
Universal Host
Controller
Interfacefor Universal
Serial Bus
ESC: Exit F1: General Help
F7: Optimized Defaults