Genie Bios Setting; Cpu Clock Ratio Unlock - DFI LanParty LT P35 User Manual

Genie BIOS Setting

CPU Feature
DRAM Timing

CPU Clock Ratio Unlock

x CPU Clock Ratio
CPU Clock
Boot Up Clock
DRAM Speed
Target DRAM Speed
PCIE Clock
Voltage Setting
PCIE Slot Config
CPU Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
↑↓→←
: Move Enter: Select
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
CPU Feature
Refer to the following pages for more information on
these submenus
DRAM Timing
CPU Clock Ratio Unlock
Set this field to Enabled to unlock the CPU clock ratio. This will allow
you to select the CPU clock ratio in the field below.
CPU Clock Ratio
This field is used to select the CPU's frequency ratio.
CPU Clock
This field provides several options for selecting the external system
bus clock of the processor. The available options allow you to adjust
the processor's bus clock by 1MHz increment.
Important:
Selecting an external bus clock other than the default setting
may result to the processor's or system's instability and are not
guaranteed to provide better system performance.
Phoenix - AwardBIOS CMOS Setup Utility
Genie BIOS Setting
Press Enter
Press Enter
Disabled
7X
266MHz
Auto
Auto
DDR2 800
100MHz
Press Enter
1X 1X
Disabled
Disabled
Disabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
3
109