System Memory - DFI LanParty LT P35 User Manual

Warning:
. .
.
.
.
.
.
.
Electrostatic discharge (ESD) can damage your system board, proces-
sor, disk drives, add-in boards, and other components. Perform the
upgrade instruction procedures described at an ESD workstation only.
If such a station is not available, you can provide some ESD protec-
tion by wearing an antistatic wrist strap and attaching it to a metal
part of the system chassis. If a wrist strap is unavailable, establish
and maintain contact with the system chassis throughout any proce-
dures requiring ESD protection.

System Memory

Warning:
. .
.
.
.
.
.
.
When the DRAM Power LED lit red, it indicates that power is
present on the DIMM sockets. Power-off the PC then unplug the
power cord prior to installing any memory modules. Failure to do so
will cause severe damage to the motherboard and components.
DIMM 1
Channel A
DIMM 2
DIMM 3
Channel B
DIMM 4
LP UT P35-T2R and LP LT P35-T2R
- Supports four 240-pin DDR2 DIMM sockets
LP UT P35-T3R and LP LT P35-T3R
- Supports four 240-pin DDR3 DIMM sockets
Hardware Installation
DRAM
Power LED
2
29