Cpu Feature; Thermal Management; Tm2 Bus Ratio - DFI LanParty LT P35 User Manual

CPU Feature

Move the cursor to this field and press <Enter>, the following
screen will appear:
Thermal Management Control

Thermal Management

TM2 Bus Ratio

TM2 Bus VID
PPM Mode
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
Virtualization Technology
Core Multi-Processing
↑↓
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Thermal Management Control
This field is used to enable or disable thermal management.
Thermal Management
Select a "thermal monitor" in this field to enable the CPU's
speedstep function. Restart the system then go to the operating
system's "Control Panel". Double-click "Power Options". The "Power
Options Properties" dialog box will appear. In the "Power Schemes"
menu, select "Portable/Laptop". Speedstep reduces the CPU's fre-
quency and voltage in accordance to its load.
Thermal Monitor 1
Thermal Monitor 2
TM2 Bus Ratio
This field is used to select the bus ratio of the throttled performance
state that will be initiated when the on-die sensor turns from cool to
hot.
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Enabled
Thermal Monitor 1
0
0.8375
Native Mode
Disabled
Auto
Enabled
Enabled
Enabled
PU/PD/+/-: Change Priority
F6: Fail-Safe Defaults
On die throtting.
Ratio and VID transition.
BIOS Setup
Item Help
Menu Level
↑ ↓
Use < > or < > to
select a device, then
press <+> to move it up,
or <-> to move it down
the list. Press <ESC> to
exit this menu.
F10: Save ESC: Exit
F7: Optimized Defaults
3
111