Altigen AltiServ User Manual page 55

Figure 9. One Number Access Setup bottom of page, version 4.0
3. If you chose to use a custom schedule (Enable based on the following
schedule), you can set up to four different schedules in the Schedule
section. You can enable or disable each schedule.
4. Select the Forwarding Numbers to be used by the system to find you
when ONA is active. You can set up to four different numbers—
extensions or outside numbers.
In version 4.0, a drop down menu is provided just in front of the
number, such that the trunk access code can be selected rather than
entered into the number field.
In version 3.5, the forwarding number fields do not show a drop-down
list to choose the trunk access. The forwarding number must contain
the trunk access code along with the number.
One Number Access
AltiServ User Guide 51