Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual page 31

Chapter 1 General Troubleshooting
0/SM2/*
0/SM3/*
LED Information
---------------------------------------------
0/1/*: Module (host) LED status says: OK
0/1/*: Module (jacket) LED status says: OK
0/1/*: Module (spa0) LED status says: OK
0/1/*: Module (spa5) LED status says: OK
0/6/*: Module (host) LED status says: OK
0/6/*: Module (jacket) LED status says: OK
0/6/*: Module (spa0) LED status says: OK
0/6/*: Module (spa4) LED status says: OK
0/6/*: Module (spa5) LED status says: OK
0/RP0/*: Module (host) LED status says: OK
0/RP0/*: Alarm LED status says: NONE
Rack 0: Upper Fan Tray: LED status : OK
Rack 0: Lower Fan Tray: LED status : OK
0/RP1/*: Module (host) LED status says: OK
0/RP1/*: Alarm LED status says: NONE
0/SM0/*: Module (host) LED status says: OK
0/SM1/*: Module (host) LED status says: OK
0/SM2/*: Module (host) LED status says: OK
0/SM3/*: Module (host) LED status says: OK
Fan Information
---------------------------------------------
Fan speed (rpm):
Rack 0:
Upper
Lower
Power Supply Information
---------------------------------------------
Zone 1:
Zone 2:
Zone 3:
Total Current:
Total Power
The example output shows the system environmental monitor parameter variables.
The output from the show context command displays core dump context information. See the
context Command" section on page 1-11
RP/0/RP0/CPU0:router# show context
node:
------------------------------------------------------------------
Crashed pid = 61524 (pkg/bin/tcam_mgr)
OL-21483-02
host
host
FAN1 FAN2 FAN3
4842 4882 4842
4882 4842 4923
Power-Supply
[A], [B]
[A], [B]
[A], [B]
30.500 A
: 1677.500 W
node0_1_CPU0
1804
1762
1804
1776
1790
FAN4
4882
4842
Voltage
(V) (A)
54.867, 54.377 4.596,
54.573, 53.985 6.894,
55.161, 54.279 4.387,
for more information on the show context command output.
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
Verifying the System
2496
2496 3285
2496
2496 3285
2470
Current
4.387
5.745
4.491
"show
1-21