Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual page 51

Chapter 1 General Troubleshooting
class-map match-any 11g
match mpls experimental topmost 5
match precedence critical
!
class-map match-any default
match any
!
class-map match-any business
match mpls experimental topmost 5
match precedence flash
!
policy-map fabric-qos
class 11g
priority
!
class business
bandwidth remaining percent 65
!
class default
bandwidth remaining percent 35
!
!
interface Loopback0
ipv4 address 10.1.1.1 255.255.255.255
!
interface MgmtEth0/RP0/CPU0/0
description Connected to router LAN
ipv4 address 192.0.2.70 255.255.255.0
!
.
.
.
!
interface POS0/6/0/3
shutdown
!
interface POS0/6/4/0
shutdown
!
interface POS0/6/4/1
The output is used to determine if the configuration is as expected.
In the following example, the path to SysDB where the configuration is stored in the database is
displayed.
RP/0/RP0/CPU0:router(config)# describe hostname router
The command is defined in shellutil.parser
Node 0/RP0/CPU0 has file shellutil.parser for boot package /disk0/hfr-os-mbi-3.3
.0/mbihfr-rp.vm from hfr-base
Package:
hfr-base
c2.95.3-p8
, E3-OC48-POS, E3-OC12-POS-4, E3-OC3-POS-16, E3-OC3-POS-8, E3-OC3-POS-4, E3-OC48
-CH, E3-OC12-CH-4, E3-OC3-CH-16, E3-GE-4, E3-OC3-ATM-4, E3-OC12-ATM-4, E5-CEC, L
C, SP
OL-21483-02
hfr-base V3.3.0[2I] Base Package
Vendor : Cisco Systems
Desc : Base Package
Build : Built on Mon May
Source : By edde-bld1 in /vws/3.3.0./file for
Card(s): RP, DRP, DRPSC, OC3-POS-4, OC12-POS, GE-3, OC12-POS-4, OC48-POS
Validating and Troubleshooting Cisco IOS XR Software Configuration
1 06:27:09 UTC 2006
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
1-41