Troubleshooting the Statistics Infrastructure
These sections describe the methods that you can use to diagnose problems with statistics such as wrong
and missing counters:
•
•
•
•
Note
Most of the commands used in the chapter requires a Cisco-support task id to execute them.
Debugging Statistics Infrastructure
The following sections list the debug commands that are used to diagnose problems with the statistics
infrastructure:
•
•
•
debug statsd api Commands
Table 11-1
are filtered by location and process. The statistics collector library is a process which supplies the
statistics to the statistics infrastructure.
OL-21483-02
Debugging Statistics Infrastructure, page 11-215
Trace Commands for the Statistics Infrastructure, page 11-217
Show Commands for the Statistics Infrastructure, page 11-218
Diagnosing Problems with Statistics Values, page 11-223
debug statsd api Commands, page 11-215
debug statsd manager Commands, page 11-216
debug statsd server errors Command, page 11-216
lists the debug statsd api commands that are printed from the statistics collector library and
C H A P T E R
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
11
11-215