Configuration Examples For Troubleshooting Load Balancing - Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual

Chapter 13 Troubleshooting Load Balancing
SUMMARY STEPS
1.
2.
DETAILED STEPS
Command or Action
Step 1
bundle-hash {Bundle-Ether | Bundle-Pos}
interface-path-id
Example:
RP/0/RP0/CPU0:router# bundle-hash
bundle-ether 12
Step 2
show interfaces [ type interface-path-id | all |
local | location node-id ] [accounting | brief |
detail | summary]
Example:
RP/0/RP0/CPU0:router# show interfaces Gi0/6/5/5

Configuration Examples for Troubleshooting Load Balancing

This section shows a practical example of troubleshooting load balancing problems, in the following
sections:
•
•
OL-21483-02
bundle-hash {Bundle-Ether | Bundle-Pos} interface-path-id
show interfaces [type interface-path-id | all | local | location node-id] [accounting | brief | detail |
summary]
Troubleshooting Layer 3 or Layer 4 Load Balancing Example
Troubleshooting Layer 2 Load Balancing Example
Configuration Examples for Troubleshooting Load Balancing
Purpose
Launches the bundle-hash utility. This is an interactive
utility that prompts for the necessary information.
Displays interface information, which includes the traffic
rates. Use this command for each link in the bundle to verify
that the simulated traffic takes the expected link. Use clear
counters to make it easier to view the traffic allocation.
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
13-239