Show Processes Startup Command - Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual

show processes Commands
Band Name
----- -------------- -------- -------- -------- ------- ---------------------
1.0 MBI
40.0 ARB
90.0 ADMIN
100.0 INFRA
150.0 STANDBY
999.0 FINAL
Started
--------- ------ -------- ---- ------- -------------------------------
0.000s
0.000s
0.000s
0.000s
0.000s
0.000s
.
.
.
Last process started:

show processes startup Command

The show processes startup command displays process data for processes created at startup. Use the
command output to check the following:
•
•
•
•
•
RP/0/RP0/CPU0:router# show processes startup
JID
-------------------------------------------------------------------------------
81
57
-u 30
72
56
h -d librs232.dll -m libconaux.dll -u libst16550.dll
74
2
55
-b
71
65
64
73
1)
77
60
0xf0000038 -m /bootflash: -s 0xfc000000,64m -r -t4 -b10
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
8-176
Finished
22.830
129.225
185.140
207.372
231.605
237.942
Level JID Inst
0.05 80
1.00 57
2.00 71
3.00 56
3.00 73
6.00 70
6d19h after boot. Total: 174
Are the listed processes, including their state, start time, restart status, placement, and mandatory
status as expected
How long it took the processes to start
The order in which the processes started
Was a process delayed indicating a boot failure or boot problems
Did the processes start within the time constraints set by the system
LAST STARTED
07/05/2006 14:46:37.514 Run
07/05/2006 14:46:37.514 Run
07/05/2006 14:46:37.514 Run
07/05/2006 14:46:37.514 Run
07/05/2006 14:46:37.514 Run
Not configured
07/05/2006 14:46:37.514 Run
07/05/2006 14:46:37.514 Run
Not configured
Not configured
07/05/2006 14:46:37.514 Run
07/05/2006 14:46:37.514 Run
%Idle JID Ready Last Process
65.130% 62 22.830 insthelper
92.080% 154 106.395 dsc
5.950% 175 55.915 fabricq_mgr
25.040% 165 22.232 fib_mgr
13.840% 104 24.233 arp
1.590% 234 6.337 ipv6_rump
Ready Process
1 0.000 wd-mbi
1 0.000 dllmgr
1 0.000 pkgfs
1 0.000 devc-conaux
1 0.000 devc-pty
1 0.000 pipe
STATE RE- PLACE-
START MENT
1
1
1
1
1
None 0
1
1
None 0
None 0
1
1
Chapter 8 Process Monitoring and Troubleshooting
MANDA- NAME(IID) ARGS
TORY
M wd-mbi(1)
M dllmgr(1) -r 60
M pkgfs(1)
M devc-conaux(1) -
M devc-pty(1) -n 3
M clock_chip(1) -r
M pipe(1)
M mqueue(1)
M cat(1) /etc/motd
M platform_dllmap(
M shmwin_svr(1)
M devf-scrp(1) -e
OL-21483-02