Customizing The Display Icon - Lexmark Apps Administrator's Manual

Configuring Card Copy Premium
•
Click Reset to cancel changes to all fields and begin again.
• Click Apply to save changes.
Note: Reset and Apply are the only options available on certain devices.

Customizing the display icon

1
Access the application configuration settings from the Embedded Web Server.
2
From the Configure, Profile, or Profiles page, add or edit a profile, and then change the settings if necessary:
• Button Text or Text—Type up to 20 characters that will appear above the profile button on the printer home
screen. This field is optional.
•
Button Icon or Icon—Browse to a new image file that represents the profile on the printer home screen. This
field is optional.
•
Button Icon when pressed or Icon when pressed—Browse to a new image file that will be displayed while the
profile icon is being pressed. This field is optional.
Notes:
– For printers running the Embedded Solutions Framework (eSF) version 3.0 or later, the image should be
a PNG file with a transparent background, and should measure 192 x 302 pixels. It should not exceed
11KB in size.
–
For printers running eSF version 2.0, the image should be a GIF, PNG, or JPEG file, and should measure
120 x 75 pixels.
– For printers running eSF version 1.2, the image should be a GIF file and should measure 120 x 75 pixels.
–
If you are unsure about which version of eSF your printer is running, then see "Checking which version of
the Embedded Solutions Framework is installed on a printer" on page 16.
3
Save or discard your changes.
6