Hayward Pro Logic® Operation Manual page 47

Automation and chlorination pro logic series
Hide thumbs Also See for Pro Logic®:
Table of Contents

Advertisement

If the sensor appears to operating properly, then the temperature will be displayed. If this temperature
is not correct then check the placement of the sensor. If the problem is not placement related, then the
sensor will, most likely, require replacement. If the display is "Open Circuit" or "Short Circuit" then
check the wiring to the sensor and also make sure that the wires are secure in the terminal block in the
Pro Logic main unit.
if Gen 2 VSPs are detected
VSP Speed/Power
± to view
Filter
Main Software
Revision 4.00
Display Software
remote-08 r3.10
Exp. Unit Software
Revision 1.10
Chemistry Sense
Software r1.00
VSP Software
± to view
if TriStar VSPs are detected
Pool Filter Bridge
Software r1.00
if EcoStar VSPs are detected
Pool Filter Display
Software r1.00
if TriStar VSPs are detected
Pool Filter VSC
Software r1.00
if EcoStar VSPs are detected
Pool Filter Drive
Software r1.00
RF Base Software
r1.20 ID:1234
6B Spa Software
Remote A r1.00
Digital Spa Software
Remote B r1.00
CL Module Software
Revision 1.00
CL Light Software
+ to view
CL LT1 Software
App:1.00 BL:1.02
Available displays depend on configuration. If you call the Hayward Technical Service Dept. for
assistance, they may ask for the software revisions of both the main unit and each of the display/
keypads or other devices that are attached to the system. Note that it is possible that different
display/keypads have different software revision levels. For this reason, it is advisable to check this
diagnostic menu item on every display.
Push to view the actual speed and power reported by the VSP
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
Push to view the software revision of the connected VSPs
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
No function
Move to previous/next menu item
Press to view the software revisions of detected lights
Move to previous/next menu item
Press to view the software revisions of detected lights
Move to previous/next ColorLogic 4.0 light/menu item
44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl-ps-4Pl-ps-8Pl-ps-16Pl-ps-8-vPl-ps-16-vPro logic pl-ps-4 ... Show all

Table of Contents