Dual Display Operation Examples; Measure Dc Voltage And Ac Ripple On A Rectification Circuit; Figure 3-1 Connection Terminal When Measuring Dc Voltage And - Agilent Technologies U3401A User's Manual And Service Manual

Dual Display Operation Examples

This section describes some practical operations when using dual display
feature.

Measure DC Voltage and AC Ripple on a Rectification Circuit

A single measurement for both DC voltage and AC ripple can be displayed
through both displays while testing a rectifier circuit.
1 Connect the red and black test leads to the input terminal and probe
+
AC/DC voltage
source
–
Figure 3-1 Connection terminal when measuring DC voltage and AC ripple
2 Press
3 Press
4 Press
• Press
N O T E
• Press
U3401A User's and Service Guide
the test points as shown in
to select DC voltage measurement in primary display.
to select AC voltage measurement for secondary display.
. Use
for secondary display.
to disable the secondary display.
to select the suitable range if DCV+ACV ripple is above the scale of the
current range.
Figure 3- 1.
and to select autoranging or manual range
Application Tutorial 3
51