Figure 1-13 Aci Rms Or Dci (10A) Terminal Connection And - Agilent Technologies U3401A User's Manual And Service Manual

Measuring AC (RMS) or DC Current up to 10 A
• Measurement ranges:
• Shunt resistance: 0.01 W to 100 Ω for 500 μA to 10 A ranges
• Input protection: Internal 25 A, 440 V fuse for 10A terminal,
1 Press
2 Press
3 Power off the measured circuit.
4 Connect the red and black test leads to the A input terminal as shown
5 Probe the test points in series with the circuit.
6 Power on the measured circuit and read the display.
Figure 1-13 ACI RMS or DCI (10A) terminal connection and display
U3401A User's and Service Guide
• 5.000 A, 10.000 A for DC or AC RMS continuous
• 12.000 A DC or AC RMS for maximum 30 seconds
or
or
in Figure 1- 13.
–
ACI or DCI
current source
+
.
to select the measurement range.
Getting Started 1
21