Format; Example; Icp.config - HP P4535A - Web Cache Server Appliance Administrator's Manual

Appendix D
After you modify the
traffic_line -x
changes will propagate.
IMPORTANT

Format

Each line in the
hosting.config
hostname=hostname
domain=domain_name
where
hostname
particular partition (for example,
is the domain whose content you want to store on a particular partition (for example,
domain_name
list_of_partition_numbers
content that belongs to the origin server or domain listed. The partition numbers must be valid numbers listed
in the
partition.config
Generic Partition
When configuring the
not belong to any of the origin servers or domains listed. If all partitions for a particular origin server become
corrupt, Traffic Server will also use the generic partition to store content for that origin server.
The generic partition must have the following format:
hostname=* partition=list_of_partition_numbers
where
list_of_partition_numbers

Example

In the following example, content from the domain
is stored on partition 2. Content from all other origin servers is stored in partitions 3 and 4.
www.hp.com
domain=hp.com partition=1
hostname=www.hp.com partition=2
hostname=* partition=3,4

icp.config

This file defines ICP peers (parent and sibling caches). Refer to
IMPORTANT
Format
Each line in the
icp.config
the following format:
host:host_IP:cache_type:proxy_port:icp_port:MC_on:MC_IP:MC_TTL:
file, Traffic Manager has to reread the configuration files. Run the
hosting.config
command. If you are running a cluster, you need only run the command for one node; the
The partition configuration must be the same on all nodes in a cluster.
file must have one of the following formats:
partition=list_of_partition_numbers
partition=list_of_partition_numbers
is the fully qualified hostname of the origin server whose content you want to store on a
www.hp.com
is a comma-separated list of the partitions on which you want to store the
file (refer to partition.config‚ on page
file, you must assign a generic partition to use for content that does
hosting.config
is a comma-separated list of generic partitions.
After you modify the
icp.config
files. Run the
traffic_line -x
run the command for one node; the changes will propagate.
file contains the name and configuration information for a single ICP peer, in
).
181).
is stored on partition 1 and content from
hp.com
ICP cache hierarchies‚ on page
file, Traffic Manager has to reread the configuration
command. If you are running a cluster, you need only
Configuration Files
).
hp.com
54.
167