Socks.config; Format; Example - HP P4535A - Web Cache Server Appliance Administrator's Manual

Appendix D
The
snmpTargetAddrEntry
communityEntry
vacmAccessEntry
To allow MIB access to one subnet named
NOTE
The
snmpTargetAddrEntry
communityEntry
vacmAccessEntry

socks.config

The
socks.config
going through the SOCKS server.
IMPORTANT

Format

Each line in the
socks.config
as the first string will be ignored. Any line containing
no_socks
format below:
no_socks IPaddresses_or_IPaddress_range
where
IPaddresses_or_IPaddress_range
ranges associated with the origin servers you want Traffic Server to access directly.

Example

The following example configures Traffic Server to access the origin server associated with the IP address
directly without going through the SOCKS server.
11.11.11.1
no_socks 11.11.11.1
The following example configures Traffic Server to access the origin servers associated with the range of IP
addresses
123.14.15.1 - 123.14.17.4
the SOCKS server.
no_socks 123.14.15.1 - 123.14.17.4, 113.14.18.2
line defines the host,
line defines the community
and
vacmSecurityToGroupEntry
OneNet
Use the netmask
255.255.255.0
definition.
snmpTargetAddrEntry
snmpTargetAddrEntry 34 snmpUDPDomain A.B.C.0:0 100 3 net_a v1ExampleParams
nonVolatile 255.255.255.0:0
communityEntry localSnmpID public OneNet localSnmpID default net_a nonVolatile
vacmAccessEntry OneNet - snmpv1 no AuthNoPriv exact All - All nonVolatile
vacmSecurityToGroupEntry snmpv1 public OneNet nonVolatile
line defines the subnet,
line defines the community
and
vacmSecurityToGroupEntry
file specifies which origin servers you want Traffic Server to access directly without
After you modify
socks.config
files. Run the
traffic_line -x
run the command for one node; the changes will propagate.
file can consist of a maximum of 400 characters. Any line not containing
and the IP address
, which has the IP address
host_a
, which contains the host
OneHost
lines allow access to the community
, enter the following lines in the configuration file:
for the subnet
A.B.C.xxx
, which has the IP address
net_a
, which contains the subnet
OneNet
lines allow access to the community
, Traffic Manager has to reread the configuration
command. If you are running a cluster, you need only
no_socks
is a comma separated list of the IP addresses or IP address
113.14.18.2
Configuration Files
. The
A.B.C.D
. The
host_a
OneHost
in the
. The
A.B.C.xxx
. The
net_a
OneNet
as the first string must follow the
directly without going through
.
.
216