HP P4535A - Web Cache Server Appliance Administrator's Manual page 222

Appendix D
Configuration Variable
Data Type
proxy.config.icp.enabled
INT
proxy.config.icp.icp_interface
STRING
proxy.config.icp.icp_port
INT
proxy.config.icp.multicast_enabled
INT
proxy.config.icp.query_timeout
INT
proxy.config.update.enabled
INT
proxy.config.update.force
INT
proxy.config.update.retry_count
INT
proxy.config.update.retry_interval
INT
proxy.config.update.concurrent_updates
INT
proxy.config.snmp.master_agent_
enabled
INT
proxy.config.plugin.plugin_dir
STRING
proxy.config.wccp.enabled
INT
Default Value Description
ICP Configuration
0 Sets ICP mode for hierarchical caching:
0 = disables ICP.
1 = allows Traffic Server to receive ICP
queries only.
2 = allows Traffic Server to send and receive
ICP queries.
Refer to
eth0 Specifies the network interface used for ICP
traffic.
3130 Specifies the UDP port that you want to use
for ICP messages.
0 Enables (1) or disables (0) ICP multicast.
2 Specifies the timeout used for ICP queries.
Scheduled Update Configuration
0 Enables (1) or disables (0) the Scheduled
Update option.
0 Enables (1) or disables (0) a force immediate
update. When enabled, Traffic Server
overrides the scheduling expiration time for
all scheduled update entries and initiates
updates until this option is disabled.
10 Specifies the number of times Traffic Server
can retry the scheduled update of a URL in
the event of failure.
2 Specifies the delay in seconds between each
scheduled update retry for a URL in the event
of failure.
100 Specifies the maximum simultaneous update
requests allowed at any point in time. This
option prevents the scheduled update process
from overburdening the host.
SNMP Configuration
1 Enables (1) or disables (0) the SNMP agent.
Plug-in Configuration
config/plugins Specifies the location of Traffic Server
plugins.
WCCP Configuration
0 Enables (1) or disables (0) WCCP.
Configuration Files
ICP cache hierarchies‚ on page 54.
210