HP P4535A - Web Cache Server Appliance Administrator's Manual page 201

Appendix D
Configuration Variable
Data Type
proxy.config.ldap.auth.multiple.ldap_
servers.enabled
INT
proxy.config.ldap.auth.bypass.enabled
INT
proxy.config.ldap.proc.ldap.server.name
STRING
proxy.config.ldap.proc.ldap.server.port
INT
proxy.config.ldap.proc.ldap.base.dn
STRING
proxy.config.http.server_port
INT
proxy.config.http.server_port_attr
STRING
proxy.config.http.server_other_ports
STRING
proxy.config.http.ssl_ports
STRING
proxy.config.http.insert_request_via_str
INT
Default Value Description
0 Enables (1) or disables (0) the use of multiple
LDAP servers for LDAP-based
authentication. You must enable this feature
when enabling LDAP authentication bypass
(proxy.config.ldap.auth.bypass.enabled).
0 Enables (1) or disables (0) client access to
specific URLs without being authenticated by
an LDAP server. When enabling this feature,
you must also enable the variable
proxy.config.ldap.auth.
multiple ldap_servers.enabled
You specify the URLs in the multiple LDAP
server configuration file (ldap_servers.config
file).
NULL Specifies the LDAP server name.
0 Specifies the LDAP port.
NULL Specifies the LDAP base Distinguished
Name (DN). Obtain this value from your
LDAP administrator.
HTTP Engine
8080 Specifies the port that Traffic Server uses
when acting as a web proxy server for web
traffic or when serving web traffic
transparently.
X Specifies the server port options. You can
specify one of the following:
C = SERVER_PORT_COMPRESSED
X = SERVER_PORT_DEFAULT
T = SERVER_PORT_BLIND_TUNNEL
NULL Specifies the ports other than the port
specified by the variable
proxy.config.http.server_port
bind for incoming http requests.
443 563 Specifies the range of ports used for
tunneling. Traffic Server allows tunnels only
to the specified ports. For example, to retrieve
an object using HTTPS via Traffic Server
requires establishing a tunnel via Traffic
Server to an origin server.
1 You can specify one of the following:
0 = no extra information is added to the
string.
1 = all extra information is added.
2 = some extra information is added.
Configuration Files
.
to
189