Using Ssl Termination - HP P4535A - Web Cache Server Appliance Administrator's Manual

Chapter 11
3. Edit the following variables:
Variable
proxy.config.ldap.auth.bypass.enabled
proxy.config.ldap.auth.multiple.ldap_servers.enabled
4. Save and close the
5. Open the
ldapsrvr.config
6. Add bypass sites to the
For information about the format of the
7. Save and close the
8. Restart Traffic Server using the command
start_traffic_server

Using SSL Termination

Traffic Server's SSL termination option enables you to secure connections in reverse proxy mode between a
client and a Traffic Server and/or Traffic Server and an origin server.
The following sections describe how to enable and configure the SSL termination option:
To enable and configure SSL termination for client/Traffic Server connections, follow the procedures in
'Client and Traffic Server connections," below.
To enable and configure SSL termination for Traffic Server/origin server connections, refer to
Server and origin server connections‚ on page
To enable and configure SSL termination for both client/Traffic Server and Traffic Server/origin server
connections, follow the procedures in both 'Client and Traffic Server connections," below, and
Server and origin server connections‚ on page
file.
records.config
file with Vi.
file.
ldapsrvr.config
ldapsrvr.config
file.
ldapsrvr.config
Description
Set this variable to 1 to enable LDAP
authentication bypass.
Set this variable to 1 to allow the sites
specified in the ldapsrvr.config file to
bypass authentication.
file, refer to
96.
96.
Security Options
page 169.
Traffic
Traffic
93