Remap.config; Format - HP P4535A - Web Cache Server Appliance Administrator's Manual

Appendix D
Configuration Variable
Data Type
proxy.config.arm.security_enabled
INT

remap.config

The
remap.config
Map URL requests for a specific origin server to the appropriate location on Traffic Server when Traffic
Server acts as a reverse proxy for that particular origin server
Reverse-map server location headers so that when origin servers respond to a request with a location
header that redirects the client to another location, the clients do not bypass the Traffic Server
Redirect HTTP requests permanently or temporarily without Traffic Server having to contact any origin
servers
Refer to Chapter 5‚ Reverse Proxy and HTTP Redirects
using reverse proxy.
IMPORTANT

Format

Each line in the
remap.config
delimited fields:
type, target
Field
type
target
replacement
Default Value
ARM (Security Configuration)
0
file contains mapping rules that Traffic Server uses to:
After you modify the
remap.config
configuration files. Run the
you need only run the command for one node; the changes will propagate.
file must contain a mapping rule. Traffic Server recognizes three space-
, and
replacement
Description
Enter either one of the following:
—translates an incoming request URL to the appropriate origin server URL
map
(HTTP reverse proxy).
—translates the URL in origin server redirect responses to point to
reverse_map
the Traffic Server (HTTP reverse proxy).
—redirects HTTP requests permanently without having to contact the
redirect
origin server. Permanent redirects notify the browser of the URL change (by
returning an HTTP status code 307) so that the browser can update bookmarks.
redirect_temporary
contact the origin server. Temporary redirects notify the browser of the URL change
for the current request only (by returning an HTTP status code 301).
Enter the origin or from URL. You can enter up to four components:
scheme host port path_prefix
:// : /
Enter the destination or to URL. You can enter up to four components:
scheme host port path_prefix
:// : /
Description
Enables (1) or disables (0) ARM security.
Refer to Controlling host access to the Traffic
Server machine (ARM security)‚ on page
for information about redirecting HTTP requests and
file, Traffic Manager has to reread the
command. If you are running a cluster,
traffic_line -x
. The following table describes the format of each field.
—redirects HTTP requests temporarily without having to
Configuration Files
81.
212