Ftp_Remap.config; Format; Example; Hosting.config - HP P4535A - Web Cache Server Appliance Administrator's Manual

Appendix D
The following rule configures Traffic Server to allow only the host associated with the IP address 11.11.1.1 to
deliver content directly into the cache.
IMPORTANT
dest_domain=. src_ip=11.11.1.1 method=PUSH action=allow
dest_domain=. method=PUSH action=deny

ftp_remap.config

The
ftp_remap.config
contains mapping rules that Traffic Server uses to direct any incoming FTP requests to the FTP server if the
requested document is a cache miss or is stale.
IMPORTANT
For information about using and configuring FTP reverse proxy, refer to
Redirects.

Format

Each line in the
ftp_remap.config
Traffic_Server_IPaddress:port ftp_server_IPaddress:port
where
Traffic_Server_IPaddress
ftp_server_IPaddress
is the port number.
port

Example

In the following example, all FTP requests sent to Traffic Server's IP address of 111.111.11.1 are directed to
the FTP server's IP address 11.11.11.1 when a request is a cache miss or is stale.
111.111.11.1:7999 11.11.11.1:21

hosting.config

The
hosting.config
you can manage your cache space more efficiently, and restrict disk usage.
For step by step instructions on partitioning the cache according to origin servers and/or domains, refer to
Partitioning the cache according to origin server or domain‚ on page
NOTE
If you enable the PUSH option, you must add a line similar to the following to prevent
unauthorized users from putting content in the cache.
file in the Traffic Server's
After you modify the
ftp_remap.config
configuration files. Run the
you need only run the command for one node; the changes will propagate.
file contains a mapping rule in the format:
is the IP address assigned to Traffic Server.
is the IP address assigned to the FTP server to which you want to redirect requests.
file lets you assign cache partitions to specific origin servers and/or domains so that
Before you can assign cache partitions to specific origin servers and/or domains, you
must partition your cache according to size and protocol in the
file. For step by step instructions on partitioning your cache, refer to
cache‚ on page 59. For a description of the
partition.config‚ on page 181.
directory is used for FTP reverse proxy and
config
file, Traffic Manager has to reread the
command. If you are running a cluster,
traffic_line -x
Chapter 5‚ Reverse Proxy and HTTP
61.
partition.config
Configuration Files
partition.config
Partitioning the
file, refer to
166