Modifying Ftp Options; To Modify Ftp Options - HP P4535A - Web Cache Server Appliance Administrator's Manual

Chapter 5
3. Edit the following variables:
Variable
proxy.config.ftp.ftp_enabled
proxy.config.ftp.reverse_ftp_enabled
4. Save and close the
5. Run the following command to apply the configuration changes
traffic_line -x

Modifying FTP Options

After you have set FTP mapping rules and have enabled FTP reverse proxy, Traffic Server can serve FTP
requests in reverse proxy mode. Traffic Server uses the default FTP options, such as the data connection mode
and connection timeouts, specified in the
better suit your needs.

To modify FTP options:

1. Telnet into the HP web cache appliance and select Shell Access as described in
Methods‚ on page
2. Open the
records.config
3. Go to the
FTP Engine
4. Edit the following variables:
Variable
proxy.config.ftp.data_connection_mode
proxy.config.ftp.control_connection_timeout
proxy.config.ftp.cache_enabled
proxy.config.ftp.logging_enabled
Description
Set this variable to 1 to enable FTP on your Traffic Server. This
variable must be enabled for Traffic Server to process FTP
requests.
Set this variable to 1 to enable the FTP reverse proxy option.
Set this variable to 0 (zero) to disable the FTP reverse proxy
option.
NOTE: If this variable is set to 0, but the
proxy.config.ftp.ftp_enabled variable (described above) is set to 1,
Traffic Server will serve FTP requests in forward proxy mode.
file.
records.config
records.config
7.
file located in Traffic Server's
section of the file.
Reverse Proxy and HTTP Redirects
file. You can modify the default FTP options to
directory with Vi.
config
Description
Set this variable to specify the FTP connection mode:
1 = PASV then PORT
2 = PORT only
3 = PASV only
Set this variable to specify how long Traffic Server
waits for a response from the FTP server.
Set this variable to 1 to enable FTP document caching
for requests sent from an FTP client. Traffic Server
will cache the FTP documents it serves.
Set this variable to 0 (zero) to disable FTP document
caching for requests sent from an FTP client. Traffic
Server always obtains the requested FTP document
from the FTP server and does not cache it.
Set this variable to 1 to enable logging of FTP
transactions.
Set this variable to 0 (zero) to disable logging of FTP
transactions.
Overview of Access
41