Storage.config; Format; Example; Update.config - HP P4535A - Web Cache Server Appliance Administrator's Manual

Appendix D
Now consider the following two requests:
http://minstar.internal.hp.com
This request will match the first line and select DNS server
requests will use
first.
http://www.microsoft.com
This request will match the second line, namely not
DNS server
255.255.255.253
retrieves this information from

storage.config

The
storage.config
cache.
IMPORTANT

Format

The format of the
storage.config
pathname size
Where
pathname
directory, or file, in bytes. You must specify a size for directories or files. For raw partitions, size specification
is optional.
You can use any partition of any size. For best performance, HP recommends the following:
Use raw disk partitions
For each disk, make all partitions the same size
For each node, use the same number of partitions on all disks
Specify pathnames according to your operating system requirements. See the following examples.

Example

The following basic example shows 64 MB of cache storage in the
/big_dir 67108864
You can use the symbol for the current directory. Here is an example of 64 MB of cache storage in the current
.
directory:
. 67108864

update.config

The
update.config
content. The file contains a list of URLs specifying objects that you want to schedule for update. Be aware that
the system validates these URLs for syntactic correctness, but not for existence.
Conceptually, a scheduled update performs a local HTTP
You can control the following parameters for each specified object:
as the default domain, and
hp.com
. Since, no
/etc/resolv.conf
file lists all the files, directories, or hard disk partitions that make up the Traffic Server
After you modify
storage.config
files. Run the
traffic_line -x
file is:
is the name of a partition, directory, or file, and
file controls how Traffic Server performs a scheduled update of specific local cache
255.255.255.255
and
hp.com hp1.com
internal.hp.com
def_domain or search_list
.
, Traffic Manager has to reread the configuration
command.
is the size of the named partition,
size
/big_dir
on the objects at the specific time or interval.
GET
Configuration Files
on port . All resolver
212
as the set of domains to search
. Therefore Traffic Server selects
was supplied, Traffic Server
directory:
218