HP P4535A - Web Cache Server Appliance Administrator's Manual page 223

Hp cache server appliance administrator guide
Hide thumbs Also See for P4535A - Web Cache Server Appliance:
Table of Contents

Advertisement

Appendix D
Configuration Variable
Data Type
proxy.config.wccp.version
INT
WCCP 1.0 variables
proxy.config.wccp.router_ip
STRING
proxy.config.wccp.ethernet_interface
STRING
WCCP 2.0 variables
proxy.config.wccp2.security_enabled
INT
proxy.config.wccp2.password
STRING
proxy.config.wccp2.multicast_enabled
INT
proxy.config.wccp2.multicast_address
STRING
proxy.config.wccp2.number_of_routers
INT
proxy.config.wccp2.router0_ip
STRING
...
proxy.config.wccp2.router10_ip
STRING
proxy.config.wccp2.svc_HTTP
INT
proxy.config.wccp2.svc_NNTP
INT
proxy.config.wccp2.svc_FTP
INT
proxy.local.wccp2.ethernet_interface
STRING
Default Value
Description
1
Specifies the version of WCCP being used.
1 = Version 1.0.
2 = Version 2.0.
NULL
Specifies the IP address of the router sending
traffic to Traffic Server.
NULL
Specifies the interface used to talk to the
router.
0
Enables (1) or disables (2) security so that the
router and the Traffic Server can authenticate
each other. (If you enable security in Traffic
Server, you must also enable security on the
router, refer to your Cisco router
documentation.)
NULL
Specifies the password used for
authentication. This must be the same
password configured on the router. It must be
at least seven characters long.
0
Enables (1) or disables (2) multicast mode.
NULL
Specifies the IP multicast address.
0
If multicast is not enabled, the routers on your
network are not automatically discovered.
You must specify the number of routers that
direct traffic to Traffic Server. WCCP 2.0
supports a maximum of 32 routers.
NULL
If multicast is not enabled, the routers on your
network are not automatically discovered.
You must specify the IP address of each
router that directs traffic to Traffic Server.
1
Enables (1) or disables (0) transparent
redirection of HTTP requests.
1
Enables (1) or disables (0) transparent
redirection of NNTP requests.
Enables (1) or disables (0) transparent
redirection of FTP requests from FTP clients.
hme0
Specifies the interface used to talk to the
router.
Configuration Files
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

P4535a

Table of Contents