Connect the power cable as shown in the following illustrations.
You must use supported Adaptor. If you connect other adaptor which is not offered by RVF1000 device, you may make malfunction, failure
System connection check
After all of the connections are completed, follow below steps to check the system operation.
1. Turn on the monitor.
2. Press the power button on the rear of the codec unit.
System booting will commence. When the booting is completed the initial configuration menu will be displayed.
If it is not displayed, check the device connections and make sure the connections are correctly set.
Now, you can use the system. Do the next configuration.
Video out of RVF1000 default setting is 720p. If the monitor (TV) does not support the 720p, press the blue
RVF1000 is rebooted automatically as 480p.
button 5 time. And then