Table of Contents
Advertisement
Connecting Power
Connect the power cable as shown in the following illustrations.
Power Connection
CAUTION
You must use a supported adapter. If you connect another adapter not offered with the system, you may cause a malfunction, failure or
fire.
System Connection Check
After all of the connections are completed, follow the steps below to check the system operation.
1. Turn on the monitor.
2. Press POWER on the rear of the codec unit.
System booting will commence. When the booting is completed, the initial configuration menu will be displayed.
If it is not displayed, check the device connections and make sure the connections are correctly set.
Now, you can use the system. Do the next configuration.
NOTE
Video out of the system is 720p by default. If the monitor (TV) does not support 720p, press the blue
reboots automatically in 480p.
Installation
button 5 times. The system
llll
19
3
Advertisement
Table of Contents
