When you access the VCS for the first time, the Initial setting screen appears. Select a language and customize the basic settings.
1. Insert two AAA batteries matching + and - correctly into the remote controller.
2. Turn on the unit. System booting will commence. The logo image will be displayed during the system booting.
3. When the booting is complete the initial configuration menu will be displayed.
4. Select the wizard option.
Select one of the below options.
Start Wizard: Select this option when you want to set the configuration with wizard. If you select this option, follow next steps.
Recommend to use the Start Wizard option than Manual setting option.
Manual Setting: Skip the wizard configuration and display the main setup window. You can set the system configuration manually.
If you setup incorrect in the Maual Setting, you may not connect call.
Select the [Next] button and press [OK] button to go to the next step or press