Table of Contents
Advertisement
30
Installation
H.323
This unit supports the H.323 protocol for placing and receiving video and voice calls.
This part is used when users attempt to using a gatekeeper function.
3
•
H.323 Name: Enter the name of the used device when making calls with H.323 with the alphabet, numbers and special characters.
•
E.164 Name: Enter the name of the used device when making calls with E.164. This name is used when users register in the gatekeeper
server. If device is registered in gatekeeper server, far site user can call this name.
•
Security: H.235 128-bit AES security in H.323 calls. When it is enabled, the system automatically encrypts calls to other systems that have
AES encryption enabled. When set to AES , calls connect, are encrypted only if the far end supports AES encryption. If the far end do not
supports AES encryption, calls are not encrypted.
•
Use Gatekeeper: Set to On when you use the gatekeeper function. This unit support the H.460 protocol for firewall and NAT traversal
of H.323 calls. You must have an H.460 server configured in your environment for this feature to function properly. If you set to On, the
H.460 NAT, Gatekeeper Address, Gatekeeper Port, Authentication ID and Auth. Password options are enabled to set it.
•
H.460 NAT: Set to On when you use the H.460 standard for NAT and firewall traversal.
•
GateKeeper Address: Enter the IP address of the primary H.323 gatekeeper.
•
GateKeeper Port: Enter the port number of the primary H.323 gatekeeper.
•
Authentication ID: Enter the ID of the H.323 gatekeeper if required.
•
Auth. password: Enter the password of the H.323 gatekeeper if required.
NOTE
You can check the registered status in the Server Status menu of the system information window.
Advertisement
Table of Contents
