Connecting Power; System Connection Check - LG V5000 Owner's Manual

Connecting Power

Connects the power cable as shown in the following illustrations.
Power Connection
CAUTION
You must use a supported adapter. If you connect another adapter not offered with the system, you may cause a malfunction, failure or fire.

System Connection Check

After all of the connections are completed, follow the steps below to check the system operation.
1. Turn on the monitor.
2. Press POWER on the rear of the codec unit.
System booting will commence. When the booting is completed, the initial configuration menu will be displayed.
If it is not displayed, check the device connections and make sure the connections are correctly set.
Now, you can use the system. Do the next configuration.
Installation 21
3