Table of Contents
Advertisement
34
Installation
-
Enable: Select when using the static NAT server to traverse your firewall. If you select this option, the NAT Public Address option is
enabled.
•
NAT Public Address: Enter the public IP address or hostname of the system.
•
Fixed Port: You can fix the TCP and UDP port range. If you set to On, the TCP Port and UDP Port options are enabled.
•
TCP Port: Enter the lowest/highest number in the reserved range of the TCP port numbers.
•
UDP Port: Enter the lowest/highest number in the reserved range of the UDP port numbers.
Service
3
•
Web server: If you set to On, you can connect to this device using the web browser.
•
Telnet: If you set to On, you can connect to this device using the telnet.
•
SSH: If you set to On, you can connect to this device using the SSH.
SNMP
•
SNMP: Allows administrators to manage the system remotely using SNMP.
-
Disable: Not used this function.
-
Enable: Selects when allows the SNMP to this device. If you select this option, the Trap Host and Community options are enabled.
•
Trap Host 1 to 3: Specifies the IP address of the computer you intend to use as your network management station and to which SNMP
traps will be sent.
Advertisement
Table of Contents
