Memory Key - Aastra Venture 3-Line with Answering User Manual

Setting up Room
monitor
The Room monitor feature is used to
remotely listen to sounds in a room,
such as an unattended lobby or a
baby's room. The Room monitor
feature only works between two
phones at a time. When functioning,
each phone's display shows the
message:
If you receive a call when Room
monitor is active, you must press the
flashing line key to answer the call
and press " to view the incoming
callers information. Answering a
call turns Room monitor off on
both phones. If your TAD answers
the call, Room monitor remains
activated.
You must first program a memory
key with the room monitor option
(see Option "08 Memory keys prog"
on page 26) for every Venture set.
Saving Room monitor to a

memory key

1. Press O.
2. Press ' until the display shows:
3. Press . The display shows:
*
4. Press ' until the display shows:
.
5. Press . The display shows:
*
6. Press the memory key you want
to use for the Room monitor
feature. The display shows:
7. Note on the memory key label
which key you have used for
Room monitor.
8. Repeat steps 1 through 7 on
every Venture set from which
you may wish to monitor.
Venture 3-Line Telephone with Answering Device User Guide 23
Setting the Room monitor
option
On the set you wish to listen to, you
must set Option "07 Room monitor"
on page 26 to on. If this option is not
.
set to on, the Room monitor option is
not available.
.
1. Press O.
Press ' until the display shows:
2.
.
3. Press
.
To activate Room monitor
1. Go to the phone from which you
wish to listen (monitoring
.
phone).
Press ' until the display shows
2.
the ID of the phone you want to
monitor.
.
. The display shows:
*
.